0.292" Lasercut Hypotube, Stainless Steel, 5.0” Length, 0.005” Coil Width, 0.010” Uncut (4.48x), 0.0015” Kerf, Quantity 3/Bag
Product Description
Type: Lasercut Stainless Steel Hypotube
Design Pattern: Interrupted Spiral
Material: Stainless Steel
Outside Diameter (OD): 0.292 inches
Inside Diameter(ID): 0.284 inches
Wall Thickness: 0.004 inches
Overall Length: 5.0 inches
Coil Width: 0.005 inches
Uncut Width: 0.010 inches
Cuts per Revolution: 4.48
Kerf Width: 0.0015 inches
Quantity: 3 per bag
This part is made from a stainless steel tube. It was machined by a fiber laser which quickly creates fine features into the component. This part design is a series of coils connected by ~9 uncut portions over two adjacent coil lengths to yield a structure that is very flexible in bending yet transmits torque well. The uncut portions are rotated 5 degrees along its length to help deliver smooth, predictable movement in use. Handle these parts with care - they are Sublime.
Product Description
Type: Lasercut Stainless Steel Hypotube
Design Pattern: Interrupted Spiral
Material: Stainless Steel
Outside Diameter (OD): 0.292 inches
Inside Diameter(ID): 0.284 inches
Wall Thickness: 0.004 inches
Overall Length: 5.0 inches
Coil Width: 0.005 inches
Uncut Width: 0.010 inches
Cuts per Revolution: 4.48
Kerf Width: 0.0015 inches
Quantity: 3 per bag
This part is made from a stainless steel tube. It was machined by a fiber laser which quickly creates fine features into the component. This part design is a series of coils connected by ~9 uncut portions over two adjacent coil lengths to yield a structure that is very flexible in bending yet transmits torque well. The uncut portions are rotated 5 degrees along its length to help deliver smooth, predictable movement in use. Handle these parts with care - they are Sublime.
Product Description
Type: Lasercut Stainless Steel Hypotube
Design Pattern: Interrupted Spiral
Material: Stainless Steel
Outside Diameter (OD): 0.292 inches
Inside Diameter(ID): 0.284 inches
Wall Thickness: 0.004 inches
Overall Length: 5.0 inches
Coil Width: 0.005 inches
Uncut Width: 0.010 inches
Cuts per Revolution: 4.48
Kerf Width: 0.0015 inches
Quantity: 3 per bag
This part is made from a stainless steel tube. It was machined by a fiber laser which quickly creates fine features into the component. This part design is a series of coils connected by ~9 uncut portions over two adjacent coil lengths to yield a structure that is very flexible in bending yet transmits torque well. The uncut portions are rotated 5 degrees along its length to help deliver smooth, predictable movement in use. Handle these parts with care - they are Sublime.